Catch up on stories from the past week (and beyond) at the Slashdot story archive

 



Forgot your password?
typodupeerror
×
Crime Government

Los Angeles Police Declare Ghost Guns an 'Epidemic,' Citing 400% Increase in Seizures (yahoo.com) 443

The Los Angeles Times reports that homemade (usually 3D-printed) "ghost guns" have contributed to more than 100 violent crimes this year, according to a report released Friday by the Los Angeles Police Department (LAPD)." Detectives have linked the untraceable weapons to 24 killings, eight attempted homicides and dozens of assaults and armed robberies since January, according to the report.

And police expect the problem to get worse, the report said. During the first half of this year, the department confiscated 863 ghost guns, a 400% increase over the 217 it seized during the same period last year, according to the report. That sharp jump suggests the number of ghost guns on the streets and such seizures "will continue to grow exponentially," the authors of the report wrote.

"Ghost guns are an epidemic not only in Los Angeles but nationwide," the department said...

Because they are not made by licensed manufacturers, they lack serial numbers, making them impossible to track. Felons who are banned from possessing firearms because of previous offenses increasingly are turning to ghost guns, LAPD officials have said. The LAPD's analysis was compiled in response to a City Council motion, introduced by Councilmen Paul Koretz and Paul Krekorian, that calls for a new city ordinance banning the possession, sale, purchase, receipt or transportation of such weapons or the "non-serialized, unfinished frames and unfinished receivers" that are used to make them.

The LAPD said it is "strongly in support" of the proposed ordinance. "Ghost guns are real, they work, and they kill," the agency said in the report.

This discussion has been archived. No new comments can be posted.

Los Angeles Police Declare Ghost Guns an 'Epidemic,' Citing 400% Increase in Seizures

Comments Filter:
  • Seriously? (Score:2, Insightful)

    by klipclop ( 6724090 )
    I think there are some alterior motives going on here. I don't believe for a second that the 3D printed guns or parts are of any kind of quality to be used in a usable firearm. I actually always thought ghost guns they are talking about are from kits where you assemble your own gun using a parts kit, gun Smith and machining the parts from metal.
    • Re: (Score:3, Insightful)

      by dogsbreath ( 730413 )

      Typical reporting fuck up. Probably referring to non-firing pieces like the grip or the slide. Rest of a ghost gun is machined metal.

      • Re:Seriously? (Score:5, Interesting)

        by ShanghaiBill ( 739463 ) on Sunday October 17, 2021 @04:08AM (#61899715)

        Probably referring to non-firing pieces like the grip or the slide.

        Unlikely. Grips and handguards are available off-the-shelf. No ID is needed. There is no reason to 3D-print a crappy replica when anyone can buy the real thing.

        Rest of a ghost gun is machined metal.

        Indeed. You can buy an AR-15 upper receiver online. The lower receiver is the serialized part. You can buy it unserialized and spend a few hours with a Sherline mill to have a fully functional rifle.

        Disclaimer: Although I own a Sherline mill, I bought my AR-15 legally.

        • Re:Seriously? (Score:5, Informative)

          by JaredOfEuropa ( 526365 ) on Sunday October 17, 2021 @04:39AM (#61899769) Journal
          Does it have to be a Sherline mill?
          Also, there are a few sort of functional lowers [arstechnica.com] out there. Why is it only the lower that needs a serial number in the US? It seems to be the easiest part of the gun to print or tool by hand; the upper and barrel are the parts that require precision manufacturing and undergo significant mechanical stress. Under EU rules, a gun's "essential parts" are considered to be the barrel, the lower, the bolt / bolt carrier. (For pistols / revolvers: the barrel, frame, slide and/or cylinder), and they all have to be marked with a serial number if possible. It's pretty hard here to just mail-order a bunch of parts and spent an afternoon in the workshop to machine the rest. Then again, it's pretty hard here to obtain a firearm legally as well.
          • Re:Seriously? (Score:5, Informative)

            by ShanghaiBill ( 739463 ) on Sunday October 17, 2021 @04:56AM (#61899787)

            Does it have to be a Sherline mill?

            No. But Sherlines [sherline.com] are cheap and easy to use.

            I have used mine to machine parts on the kitchen table. My kids have used it to make parts for school projects.

            Why is it only the lower that needs a serial number in the US?

            That's the way the law works. The part with the serial number is "the gun" and the other components are just "spare parts". For most guns, that works because the serialized part is the hardest to make. But for an AR-15, the serialized lower receiver is relatively easy to make. The hardest part to make is the unserialized upper that has the rifled barrel and chromium-plated chamber. Making that is way beyond my skill level.

          • Re: Seriously? (Score:4, Insightful)

            by ravenshrike ( 808508 ) on Sunday October 17, 2021 @07:16AM (#61900025)

            It is highly unlikely any of the guns used in the killings or robberies mentioned in TFA were committed with a rifle, let alone an AR-15. They're going to be pistols, and maybe a shotgun oe two.

        • Re:Seriously? (Score:5, Insightful)

          by Ritz_Just_Ritz ( 883997 ) on Sunday October 17, 2021 @07:49AM (#61900097)

          It is currently perfectly legal to machine your own lower too. It has ALWAYS been legal to manufacture your own firearm (as long as you're legally allowed to own one). You're just not allowed to sell it. Nothing of consequence is 3D printed in a working firearm. However, CNC machines are becoming small and affordable enough to literally make your own lower receiver out of a hunk of aluminum or strong polymer. There are also companies specializing in making jigs so that you can effectively take an 80% finished receiver and use a common hand held router to finish the milling work.

          It is impossible to put that technology genie back in the bottle. There are many other uses for CNC machines and they are getting cheaper and more capable by the minute. You COULD do what these folks are trying to do and just make it illegal to possess a "ghost gun" and attempt to control the raw materials to make them. However, those machines and materials are also used to make MANY other things that are perfectly legal. What's next? A background check to buy a CNC machine? Needing to show your passport to buy aluminum bar stock? A permit needed for router or drill bits?

          Best,

        • Perfectly legal on a Federal level and most states to make your own firearm, just don't violate the NFA (ie, no full auto) or GCA (no prohibited persons) and you can't be making for sale (you'd need a manufacturers FFL/SOT). With an AR15, the lower is the registered part (at the moment....) and the lower really doesn't deal with the massive pressures and such - it is simply to manage the magazine and the trigger group and keep it all in proper alignment. You can make a lower out of aluminum (standard), po

    • by LKM ( 227954 )
      Modern 3D-printed guns absolutely do work. But what is important to understand is that you don't turn on the 3D printer, hit start, and end up with a working gun. You'll end up with most of the parts, but usually excluding things like springs (obviously), the barrel, the pin, and other smaller parts. If you do supply these parts (wich can also be manufactured quite easily at home), and assemble the 3D-printed gun, you will end up with a reasonably reliable end product.

      3D-printed guns have gotten a lot bet
      • "Modern 3D-printed guns absolutely do work. But what is important to understand is that you don't turn on the 3D printer, hit start, and end up with a working gun."

        Yes, you'd need a 10000$ printer for that and everybody knows cartels and the mob don't have that kind of money.

        • by boaworm ( 180781 )

          The problem - as presented - is not that cartels with deep wallets cannot buy and assemble a workshop and start their own armory. The stated problem is that Joe the mugger can get a cheap printer at home, and print a gun.

          Last time I read about California and ghost guns, the problem statement was different. It was that companies online were selling pre-made parts very closely resembling the final product. All without serial numbers. All it takes for Joe the Mugger to complete it is to drill a hole somewhere.

    • 3d printed guns are moving the needle very little, but home CNC'd guns are probably a bigger and bigger factor. There are now several CNCs designed just for making gun parts.

    • Believe what you wish, then take a look at https://ghostguns.com/ [ghostguns.com] to seecommercial provided tools for home ghost gun builders. Even if the firearms are not physically robust and are more likely than most guns to jam, they don't have to work well to be a risk to life and limb.

  • It's almost as if gun control was rendered moot by the ease in which self manufactured firearms can be made. Thanks to heroes like the recently departed JStark, not only can we in the US make firearms, but people across the world can make them using parts from their local hardware store. Overseas getting your hands on ammunition may be a challenge, but in the US there's just so much ammo sitting in closets and bunkers that there's no controlling that either.
    • by Chas ( 5144 )

      And you're talking about stockpiles held by legal firearm owners with no criminal record.

      Or is merely owning a firearm now criminal in your opinion?

  • by rossdee ( 243626 ) on Sunday October 17, 2021 @02:43AM (#61899595)

    but where does the barrel come from?

    • but where does the barrel come from?

      Under Federal law, as long as the receiver is unfinished you can legally sell a gun kit complete with barrel and the nothing has to be identified with a serial number.

      The barrel comes with the gun kit.

      Ghost gun FAQ [americanprogress.org]

    • For an AR-15, the barrel and chamber are part of the upper receiver. They are not serialized and can be purchased by anyone. Legally, it is just a chunk of metal.

  • Yep here we go again (Score:5, Interesting)

    by LondoMollari ( 172563 ) on Sunday October 17, 2021 @02:44AM (#61899597) Homepage

    Bad guys are doing crime with untraceable weapons, so pass a law saying all weapons must be traceable. Bad guys will comply. Instant success.

    • This sort of comment comes up every time theres a gun control discussion on Slashdot - “you cant do anything because the bad guys wont play along”.

      Ok, putting aside the fact that gun crime is significantly less in countries that have had gun control enacted within living memory, and taking the premise that gun control only affects legally held guns, I ask you this:

      Whats your solution?

      Its obvious America needs one, even if most Americans seem to think there isnt a problem, so what do you suggest?

      • Probably just ban the sale of gun kits w/out receiver.

        • by Chas ( 5144 )

          So if I want to customize my Glock 19x, I have to literally buy another ENTIRE FIREARM?

      • by LubosD ( 909058 ) on Sunday October 17, 2021 @04:19AM (#61899737)

        Ok, putting aside the fact that gun crime is significantly less in countries that have had gun control enacted within living memory

        I don't have a solution for you, but thinking that gun control is the solution because "it must have worked elsewhere" is part of the problem. I live in the 2nd most gun friendly country in the world (a few days ago I received an invitation for a "rifle shooting course while flying on a helicopter"), but despite that we're constantly in top 10 safest countries of the world.

        I guess one difference is we don't have too many real firearms among criminals. Also, we somehow lack the dumb people placing loaded guns within the reach of toddlers and things like that. Furthermore, no killings at schools, regardless of weapon of choice. Somehow our kids don't feel the need to murder their schoolmates.

        We also have almost no knife crime (hello UK!) despite having no laws banning the carry of cold weapons.

        I'd personally say the problem is in the people and the society. The use of weapons is just a manifestation of such problems.

        • by jjn1056 ( 85209 )

          Ok, putting aside the fact that gun crime is significantly less in countries that have had gun control enacted within living memory

          I don't have a solution for you, but thinking that gun control is the solution because "it must have worked elsewhere" is part of the problem. I live in the 2nd most gun friendly country in the world (a few days ago I received an invitation for a "rifle shooting course while flying on a helicopter"), but despite that we're constantly in top 10 safest countries of the world.

          I guess one difference is we don't have too many real firearms among criminals. Also, we somehow lack the dumb people placing loaded guns within the reach of toddlers and things like that. Furthermore, no killings at schools, regardless of weapon of choice. Somehow our kids don't feel the need to murder their schoolmates.

          We also have almost no knife crime (hello UK!) despite having no laws banning the carry of cold weapons.

          I'd personally say the problem is in the people and the society. The use of weapons is just a manifestation of such problems.

          These are all great points. Here in the USA we lack a strong social safety net, we lack healthcare as a right, and we have a long, historic racism due to hundreds of years of slavery and abuse of indigenous peoples. We have a militarized police force that is completely untrusted by significant populations. We have social problems that don't exist in some countries and its hard for me to believe (well, as a liberal it is) that some of those differences are not as or more reasons why we have more crime iss

      • most Americans seem to think there isnt a problem,

        Maybe they are right. Gun homicides are far lower than they were a generation ago. Gun suicides outnumber gun homicides.

        Gun violence is almost entirely a problem for people who either choose to have a gun or are criminals.

        If you aren't a criminal and live in a household that doesn't have any guns, gun violence is unlikely to affect you.

        For people who choose to own a gun, it is not your right to tell them how to live their lives.

      • I am an European citizen, and therefore only have indirect knowledge of the situation in the US.

        If you look at the data, there seems to be two approaches that work: gun control and education.

        Gun control in the US seems to be something that will take several generations to produce any effect, given the enormous number of guns out there already.

        Education usually takes only about 15 to 20 years to produce societal effects. Reality is, countries such as Switzerland and Israel also have extremely high gun owners

      • Whats your solution?

        Make America Great At Something Other Than Fuckery, for the first time. America's primary competence has been war. In order to reduce the numbers of people wanting to kill people, we're going to have to get good at something else, like meeting people's needs.

  • by Crashmarik ( 635988 ) on Sunday October 17, 2021 @02:45AM (#61899599)

    Plumbing pipe ?
    Drill presses ?
    Nails ?

    You can make a zipgun for less than 10 bucks from materials you can get in any hardware store.

    This story is just pandering to fearful people who can't accept the world will never be a safe place until it's a dead place

    • by tokul ( 682258 )

      Your zipgun will not have same killing capacity as 80% receiver upgraded to full set.

    • Re: (Score:2, Insightful)

      by AmiMoJo ( 196126 )

      And yet the police are saying that there are now more home-made guns than before. Why would that be?

      You could always make a gun cheaply, but most people didn't for some reason. Probably lack of skills or a workshop, and the low and highly variable quality of the finished product.

      Now you can 3D print guns reliably with minimal experience and space.

      Clearly something has changed here. If that means something should be done about it is another question, but we should at least have a discussion about it instead

  • I would guess that there are zero 3d printed guns and almost entirely polymer80 glocks.
    • by Chas ( 5144 )

      Again, zip guns are cheaper.

      Sure, they're not as fancy.
      And sure, they might blow your hand off.
      But the thing is, they DO work. And it doesn't take lots of money or skill to create one.

  • by Rosco P. Coltrane ( 209368 ) on Sunday October 17, 2021 @03:45AM (#61899687)

    Do traceable guns refuse to fire? Or in other words, how does traceability reduce crime? I can't imagine a baddie going "Oh my! I'd better totally refrain from shooting that guy with this traceable gun I have in my hand. I knew I should have gotten us an untraceable gun. Phew, that was close!"

    What the fuzz is complaining about is that they have a harder time linking a gun to a person. But that's nothing new: that's been a thing since someone got the idea of bringing a file to a serial number.

    • by larwe ( 858929 )

      someone got the idea of bringing a file to a serial number.

      Filing off serial numbers stamped into small metal objects is actually quite difficult. The crystalline structure of the metal underneath is stressed, far deeper than the depth of the actual letters/numbers being stamped into the metal. Acid-etching the filed surface usually results in a legible serial number. Removing enough material that this is no longer possible, in many cases, would make the gun structurally unsafe (not to mention, most people filing off serial numbers would not consider this possibili

  • I am not surprised if criminals are taking advantage of technology. The question, did the total numbers of felonies rise?
  • Conflating data (Score:5, Insightful)

    by sgunhouse ( 1050564 ) on Sunday October 17, 2021 @04:22AM (#61899743)
    I wish they wouldn't mix different things. They mention 3D-printed guns first, but then they talk about unserialized frames. You can buy an "80% frame" (basically, the frame of a real gun, but not finished - it still needs 20% of the finishing work done), finish it yourself and add the other parts, and you haven't broken any federal laws by doing so. Though if you sell it, that is a different story - and of course, I don't know what your state and local laws may be. Nothing I've just discussed involves 3D printing. The question being, who is lying to whom here? Are the cops lying to the council, is the council lying to the public, or is the media the one who added "3D printed" just to push the public's buttons?
  • ... as many gun enthusiasts have predicted, stricter gun laws do jack shit about the people who intend to do unlawful things with their guns in the first place.

    Insert surprised pikachu face for the memes.

  • I'm glad someone finally invented a weapon to kill all these fucking ghosts! There's more and more of them lately and I'm running out hair dye.
  • by bradley13 ( 1118935 ) on Sunday October 17, 2021 @04:58AM (#61899793) Homepage
    The problem isn't the guns. It's the violent subculture that uses them. Mostly related to gangs and/or drugs.

    Realistically, the guns aren't going away. However, addressing the real problem is a lot harder. Just what *do* you do with a violent, uneducated underclass that numbers in the millions?

  • A 400% increase in seizures? I wonder if there's a link between ghost guns and epilepsy.

  • Iit appears that State Hournal-Register [sj-r.com] in Anaheim-Santa Ana-Irvine and Los Angeles-Long Beach-Glendale there were 54,690 violent crimes reported in 2020. Not all were gun crimes.

    In light of this, 100 ghost guns does not seem epidemic.
  • Epidemic? (Score:4, Informative)

    by kenh ( 9056 ) on Sunday October 17, 2021 @10:01AM (#61900407) Homepage Journal

    Detectives have linked the untraceable weapons to 24 killings, eight attempted homicides and dozens of assaults and armed robberies since January, according to the report.

    Epidemic? That's a Saturday afternoon in Chicago.

I THINK THEY SHOULD CONTINUE the policy of not giving a Nobel Prize for paneling. -- Jack Handley, The New Mexican, 1988.

Working...