Benz145 writes "The famous Sony VAIO UX UMPC may have been cancelled a few years back by Sony, but the community at Micro PC Talk won't let it die. Modder Anh has carefully removed the relatively slow 1.33Ghz Core Solo CPU and installed a much faster Intel Core 2 Duo U7700 (a process which involves reballing the entire CPU). On top of this, he managed to install an incredibly small 4-port USB hub into the unit which allowed for the further instillation of a Huawei E172 modem for 3G data/voice/SMS, a GPS receiver, and a Pinnacle HD TV receiver. All of this was done without modifying the device's tiny external case. Great high-res pictures of the motherboard with the modded hardware can be seen through the link."

An anonymous reader writes "A 'Hackintosh' is a computer that runs Apple's OS X operating system on non-Apple hardware. This has been possible since Apple's switch from IBM's PowerPC processors to Intel processors a few years ago. Until recently, building a PC-based Mac was something done only by hard-core hackers and technophiles, but in the last few months, building a Hackintosh PC has become much easier. Benchmark Reviews looks at what it's possible to do with PC hardware and the Mac Snow Leopard OS today, and the pros and cons of building a Hackintosh computer system over purchasing a supported Apple Mac Pro."

Adair writes "A father and son team from Brooklyn successfully launched a homemade spacecraft nearly 19 miles (around 100,000 feet) above the Earth's surface. The craft was a 19-inch helium-filled weather balloon attached to a Styrofoam capsule that housed an HD video camera and an iPhone. The camera recorded video of its ascent into the stratosphere, its apogee where the balloon reached its breaking point, and its descent back to earth. They rigged a parachute to the capsule to aid in its return to Earth, and the iPhone broadcast its GPS coordinates so they could track it down. The craft landed a mere 30 miles from its launch point in Newburgh, NY, due to a quick ascent and two differing wind patterns. The pair spent eight months researching and test-flying the craft before launching it in August. Columbia University Professor of Astronomy Marcel Aguera said, 'They were very good but also very lucky.'"

bowman9991 writes "Star Wars creator George Lucas is converting all six films from his iconic science fiction saga into 3D and will re-release them in theatres in 2012. 'Episode I: The Phantom Menace' will be released first."

Wired has noted that "Soon, thanks to the tireless efforts of the iPhone Dev Team, you will be able to install apps on your AppleTV. An upcoming Jailbreak tool, called SHAtter, has already been used to unlock the new Apple TV's firmware." The units are supposedly now shipping. I have a lot of questions about the device (like how will it handle the photo screen saver if your local machines are offline) but hacking it might make the thing more usable (divx please, and how about letting my screen share my desktop to my TV?).

EqualSlash writes "The Arduino Project is releasing two new boards — Arduino Uno to replace Duemilanove and Arduino Mega 2560 to replace the existing Arduino Mega board. With Uno, the board is not just getting a new pronunciation-friendly name but also has a custom-made USB-serial converter to replace the older FTDI chipset, thereby removing the need to install drivers (they now have their own USB Vendor ID). It now has a logo and stylish packaging, and soon will have its own branded web store. A new Ethernet integrated board and a tinkering toolkit will be made available shortly."

YokimaSun writes "Following up on yesterday's story about the PS3 being hacked by one of its own official controllers, there's now a guide in English that details how to mod a Sixaxxis controller. But thanks to the very latest releases, if you don't like soldering you can now use an iPod, a Pandora console or even a Dingoo console. Finally, Jaicrab has released a USB firmware loader which will come in handy once the first custom firmware for the PS3 is released. Maybe then we will get region-free Blu-ray, PS1 and PS2 games."

YokimaSun writes "The PS3 Hacking War took on a new turn few days ago with Sony releasing a new firmware that blocks USB devices, supposedly aimed at cloned PS3 Joypads, but more than likely to stop the efforts of hackers. Today the PS3 is now hackable using its own Sixaxis/DualShock 3 Controllers. How will Sony stop people now from playing emulators on the PS3?"

frank249 writes "In January, on the fiftieth anniversary of the Trieste descent, the X Prize Foundation announced a $10 million prize for the first privately funded craft to make two manned descents to the bottom of Challenger Deep, the deepest surveyed point in the oceans. Now, James Cameron has announced he has commissioned a submarine capable of surviving the tremendous pressures at a depth of seven miles, from which he will not only try for the X prize but also shoot 3D footage that may be incorporated in Avatar's sequel."

rwllama writes "We at the Hubble Space Telescope have quietly released our first anaglyph (i.e. red/cyan) stereo 3D movie of a flight into a Hubble image. This work is a follow-on to the sequences we produced for the 'Hubble 3D' Imax film. Note that the 3D interpretation uses lots of artistic license, so it is not intended to be scientifically accurate. We would love to hear the Slashdot crowd's feedback on whether you want more, are artistic interpretations of scientific data acceptable, is anaglyph 3D too annoying, how many could watch this with a real 3D (e.g., NVIDIA 3D Vision) setup, etc?"

RyuuzakiTetsuya writes "Destructoid is reporting that the 3.42 firmware has been released for the PlayStation 3, and it has fixed the USB vulnerability that allows the PSJailbreak exploit to work." Sony's brief announcement of the update refers only to "additional security features," though the EU blog post acknowledges that a vulnerability was addressed. PS3-Hacks.com confirms that the patch is effective against the various jailbreak tools, and they point out a different tool for bypassing the update. Sony told the BBC, "... as we always have, we will continue to take necessary actions to both hardware and software to protect the intellectual content provided on the PlayStation 3."

harrymcc writes "I'm at IFA in Berlin — Europe's equivalent of the Consumer Electronics Show — and the massive halls are dominated by 3D TVs made by everyone from Sony, Samsung, and Panasonic to companies you've never heard of. The manufacturers seem pretty excited, but 3D has so many downsides — most of all the lousy image quality and unimpressive dimensionality effect — that I can't imagine consumers are going to go for this. 'As a medium, 3D remains remarkably self-trivializing. Virtually nobody who works with it can resist thrusting stuff at the camera, just to make clear to viewers that they’re experiencing the miracle of the third dimension. When Lang Lang banged away at his piano during Sony’s event, a cameraman zoomed in and out on the musical instrument for no apparent reason, and one of the company’s representatives kept robotically shoving his hands forward. Hey, it’s 3D — watch this!'"

angry tapir writes "Late last week an Australian court issued an injunction against a handful of retailers selling or importing hardware — commonly known as 'mod chips' — that allows unauthorized software to run on Sony's PlayStation 3. The court also required that the four parties that were the subject of the injunction actually hand over to Sony any PlayStation modchips they have. Sony's PlayStation 3 mod chip lawsuit could be just the first of many such cases in Australia, according to a lawyer who defended a client against Nintendo in a similar case earlier this year."

egil writes "Chris Fenton built his own fully functional 1/10 scale Cray-1 supercomputer. True to the original, it includes the couch-seat, but is also binary compatible with the original. Instead of the power-hungry ECL technology, however, the scale model is built around a Xilinx Spartan-3E 1600 development board. All software is available if you want to build one for your own living room. The largest obstacle in the project is to find original software."

sk8pmp writes with news that iFixit, a website known for Apple gadget teardowns and repair guides, is expanding into the game console market, launching a series of troubleshooting and repair guides to help gamers fix their own machines. They're also starting to sell replacement parts and the tools necessary to work on them. "Right now there are repair guides for 24 gaming consoles, including 206 repairs and upgrades. Some of these fixes deal with major issues, such as the infamous Red Ring of Death from the Xbox 360, but others are simpler. For instance, right now there is no easy way to clean out the fans inside your console. 'I think this is probably the number one cause of overheating these days now that manufacturers have mostly gotten their act together,' Wiens said. 'This is routine maintenance, and it's mind-boggling that the manufacturers don't provide people with an easy way to open the case up and blow it out.' You'll also learn how to replace broken LCD screens on your portables, replace the motherboard on your PlayStation 3, and do just about anything else you might want to do to these systems, from the simple to the harrowing."

IQpierce writes "My good friend Bradley W. Lewis has set up a site for his hobby: building replica lightsabers at home. These aren't your average cheap pieces of plastic, in fact they're more authentic than the Master Replica sabers: Brad tracks down the pieces of equipment actually used to build the original props — or, when they're unavailable, very close replicas, that he further customizes with a metal lathe in his garage — and puts them together with loving attention. My favorite part is the embellishments he does add, on the inside of the saber — his replica of Luke's saber from ANH can be opened to see authentic-looking internals such as a glowing crystal (as well as another surprise — an autograph from Luke himself, Mark Hamill). Each project is documented step-by-step with hundreds of photos — whether you're a hobbyist, or just a big Star Wars geek like me, you'll find it interesting."

TangoMargarine writes "Sometimes, expensive calculators hit the floor. It's happened to almost anyone with a graphing calculator from TI or HP. Sadly, they don't always bounce. After this happened to [Howard C.], an Industrial Engineering student from U. of Iowa, he decided to spend $50 on milling his own replacement case out of aluminum rather than trashing the device over a broken battery compartment."

An anonymous reader writes "I'm moving to a rural community in the central United States. On the property is a satellite dish in excess of 3 meters in diameter that seems to still be in excellent condition. I already enjoy shortwave radio and was wondering what interesting TV feeds I might be able to catch with the dish. What kind of equipment would I need and how much should I expect to spend? If it's not useful for that purpose, what other fun projects might I use it for?"

An anonymous reader writes "Peter Jansen, a PhD student and member of the RepRap community, has constructed a working prototype of an inexpensive table-top laser cutter built out of old CD/DVD drives as an offshoot of his efforts to design an under $200 open-source Selective Laser Sintering (SLS) 3D printer. Where traditional laser cutters use powerful, fixed-focus beams, this new technique dynamically adjusts the focal point of the laser using a reciprocating motion similar to a reciprocating saw, allowing a far less powerful and inexpensive laser diode to be used. The technique is currently limited to cutting black materials to a depth of only a few millimeters, but should still be useful and enabling for Makers and other crafters. The end-goal is to create a hybrid inexpensive 3D printer that can be easily reconfigured for 2D laser cutting, providing powerful making tools to the desktop."

Plammox writes "A non-profit suborbital space endeavor lead by Kristian von Bengtson and Peter Madsen is trying to put a man in space. The first test of the boosters and space craft in combination with the sea launch platform will take place this week. The catch? All of this is a non-profit project based on voluntary labor and sponsors. How will they get the launch platform out in the middle of the Baltic sea to perform the test? With the founder's home-built submarine pushing it, of course."